OVERVIEW
Muscatine Lighting Company is in need of outside material handlers.

JOB RESPONSIBILITIES:

• Will load trucks outside.
• Lift up to 60 lbs. regularly.
• Attention to detail is important.

SKILLS/QUALIFICATIONS:

• Dependable and reliable
• Hand eye coordination using a hammer.

WORK HOURS/SHIFTS AVAILABLE:

• 1st shift is 6AM TO 2PM, 2nd shift is 1pm to 9pm.
• Overtime can be required.

WAGE:

• $18.00 per hour on 1st shift and $19.25 per hour on 2nd shift.

BACKGROUND SCREENING/REQUIREMENTS:

• Pre-employment drug testing and background check.

See Mike Thomas (563)263-6589. mthomas@tempassociates.com

OVERVIEW
Muscatine Lighting company is in need of production mig welders to work in their fabrication areas.

JOB RESPONSIBILITIES

• Weld parts for outdoor lighting systems.
• Grind and finish welds.
• Material Handling - lifting up 50 lbs.

SKILLS/QUALIFICATIONS

• 2 years of mig welding experience or school training.

WORK HOURS/SHIFT

• Monday through Thursday 5AM to 3:00PM.
• Overtime will be required on Fridays when needed.

WAGE

• $20 per hour

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment drug testing and background check.

See Mike Thomas (563)263-6589, mthomas@tempassociates.com

Individual will be performing various tasks within a variety of production area(s) as needed. This will require the ability to operate various equipment and tools with training available on the job.

SPECIFIC JOB DUTIES

Job duties will include but not limited to:

• Operating a variety of machines such as: punch press, hydraulic press, brake press drill press, rollform, powder coat paint line and welding
• Moving and maneuvering carts and coils of  steel
• Performing quality checks on steel for proper length using various gages and calibers
• Performing visual inspection of completed parts for quality and production defects
• Must be able to complete accurate daily production  paperwork
• Other duties as assigned

SKILLS/ ABILITIES

• Job requires a motivated, self-starter with initiative and a positive attitude. Individual must be dependable and have mechanical abilities to produce quality parts in a fast paced manufacturing operation. Job requires an individual who is conscientious about safety and quality.

SHIFTS

• 1st shift – 3:30 am – 2:00 pm (Mon-Thurs) *Occasional OT on Friday
• 2nd shift – 2:00 pm – 12:30 am (Mon-Thurs) *Occasional OT on Friday

WAGE

• 1st shift: $16/hr
• 2nd shift $17/hr 

If interested contact Christine at cfear@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

A Direct Hire job with Carver Pump, a leading manufacturer of centrifugal pumps in Naval and Industrial markets has a Finished Parts position available. Candidates will learn the paint, hydro-test, crate, shipping, and receiving processes.

SKILLS/QUALIFICATIONS

• Experience with hand tools
• Excellent math skills
• Industrial painting
• Strong work ethic
• Dependable and reliable
• Effective communication skills

WORK HOURS

• 1st shift, while training. 2nd shift once trained

WAGE

• $20.43-$28.77

BACKGROUNG SCREENING REQUIREMENTS

• Pre-employment background check and drug test required

       High School Diploma or equivalent

Contact Gina at 563-263-6589 or gothmer@tempassociates.com

Full time bank tellers! This is a temp-to-hire position.

JOB RESPONSIBILITIES

• Handle customer transactions professionally and in a timely manner
• Balance cash drawer daily
• Ability to explain and sell a variety of bank products/services
• Accurately prepare all paperwork and assist the customer in completing necessary documentation
• Follow proper reporting structures and company policies and procedures

QUALIFICATIONS

• Excellent customer service skills; must be outgoing, friendly, and approachable
• Prior cash handling experience in a retail setting
• High School Diploma or GED
• Bilingual Needed- Spanish and English
• Must be able to pass pre-hire background and credit check requirements

HOURS & PAY:

• Hours vary: Monday-Friday. Rotating weekends.
• $17.56/HR. plus incentives.

JOB TYPE:

• Full-time

WORK LOCATION:

• In Muscatine

If interested contact Karina at kvillegas@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

Essential Responsibilities include:

• Assemble or repackage small consumer ventilation products.
• Maintain established production, quality, safety, and attendance standards,
• Perform rework on products. (inspect for defects, repair or replace defectives, report daily quantities).
   

Job Requirements include, but are not limited to:

• Comprehension of the product line, components, and packaging.
• Commitment to maintaining established production, quality, safety, and attendance standards while working independently and as part of a team.
• Accuracy and attention to detail.
• Ethical conduct and integrity.
• Teamwork.
• Proficiency with hand tools.
• Ability to follow verbal, written, and/or graphical instructions.
• Ability to work standing or seated for the duration of the work day.
• Ability to listen for audible annunciations.
• Ability to watch for visible annunciations.
• Repetitive lifting or stacking/unstacking of cartons and pallets up to 45 Ibs.
• Regular and reliable attendance is an essential function of this position.
• Honesty, reliability, flexibility, and enthusiasm.
   

Hours:
1^st shift: Monday-Friday (8 am – 4:30 pm)

Wage:
$13

If interested contact Christine at cfear@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

Pipe insulating company in need of insulation installers in new building sites.

JOB RESPONSIBILITIE

• Install insulation around piping
• Make necessary adjustments for pipe fitting
• Measure, cut, fabricate insulation, and metal jackets using sharp knives, saws, tin snips, etc.
• Climb stairs, ladders and scaffolding
• Work off elevated lifts and/or extension ladders taller than 12' occasionally
• Work in a construction environment
• Work indoor and outdoor temperatures
• Work in confined spaces on occasion or as needed (tunnels, attics, building chases)

SKILLS & QUALIFICATIONS

• Experience with pipe insulation/craftsman trade
• Must be able to provide own basic tools (tape measure, sharp knife, razor knife-with retractable blade, channel lock type pliers, scissors, and tin snips
• Dependable and reliable
• Read and use tape measure along with basic math skills
• Listen and understand directions, then apply
• Be able to carry anywhere from 50-100lbs

SAFETY REQUIREMENTS

• Wear hard hat, safety glasses/goggles, and gloves (provided by employer)
• Wear safety toed boots, long pants and minimum short sleeve shirt (provided by employee)

EDUCATION/EXPERIENCE REQUIRED

• Experience preferred but will train

WORK HOURS/SHIFT

• Iowa City location: 1st shift M-TH (5:30 am – 4:30 pm) with possible over-time on Friday. Transportation is provided to and from the Muscatine pick up location to the work sites.
• Quad Cities location 1st shift M-F (7 am – 4 pm). Must provide own transportation to and from Quad Cities office.

WAGE

• $19-20/hr. depending on experience

If interested contact Christine at cfear@tempassociates.com or call 563.263.6589. To apply click the apply now button below.

• Moscow Iowa manufacturer of hydraulic leveling systems for motor homes is in need of CNC operators

JOB RESPONSIBILITIES

• Working with machines in order to produce parts
• Material Handling – lifting up to 50 lbs.
• Use of tools

SKILLS/QUALIFICATIONS

• Dependable and reliable
• Experience using cnc lathes/mills
• Ability to use micrometers and calipers

WORK HOURS/SHIFT

• Monday – Friday 5AM – 3:30PM
• 50 hour work week with overtime pay after 40 hours

WAGE

• $17+ depends on experience

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment drug testing

If interested contact Matt at 563-263-6589 or click the apply now button below.

• Wilton, Iowa manufacturer of cold finished steel bars is in need of MIG welders.

DESCRIPTION

• Responsible for fitting and welding of steel, aluminum and stainless steel parts using a MIG and/or TIG process. Also required to perform other miscellaneous tasks, as assigned by his or her supervisor.

RESPONSIBILITIES

• Set up welding machines based on the job at hand or using a Welding Procedure Specification
• Read and interpret blueprints and/or drawings to determine the specific welding requirements - MIG and TIG weld steel, aluminum and stainless steel components based on the specifications of the blueprints and/or drawings
• Ensure work is done safely and meets quality standards
• Follow, create and help maintain Welding Procedure Specifications
• Assemble items as instructed by floor supervisor
• Keep work areas clean and organized and take proper care of all equipment and facilities
• Follow all company rules and policies
• Provide a great level of attention to detail and focus on the given task
• Follow all safety rules and quality standards
• Work with team members to maximize productivity and efficiency
• Prepare product for shipment
• Lift raw materials, final products, and items packed for shipment, manually (up to 60 pounds), or using a hoist
• Uphold all ISO and OSHA standards applicable to the responsibilities above

SKILL REQUIREMENTS

• Experience with steel, aluminum and/or stainless steel required
• Experience with MIG and TIG welding highly preferred
• Experience with CNC press breaks, CNC folding machines and automatic saws highly preferred
• Ability to lift heavy items up to 60 pounds consistently required
• Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
• Ability to identify and measure material
• Ability to produce quality products consistently
• Ability to follow instructions given both verbally and in written form
• Willingness to learn and work to the best of his/her abilities as well as dependable work ethic
• Knowledge of machines and tools, including their designs and uses
• Ability to read blueprints, drawings, calipers, tape measures and angle gauges

WAGE

• $19.75 an hour - paid weekly

HOURS

• 1st shift: M-F  6am-2:30pm (some overtime may be required)

BACKGROUND SCREENING/REQUIREMENTS

• Pre-employment background screening
• Pre-employment drug screening

If interested contact Mike at 563-263-6589 or click the apply now button.